Thermo Scientific Apreo User's Operation Manual page 67

Snapshot (camera with small green sector) / Photo (camera) preset icon indicates the matching dwell-time value.
Set all possible properties in the Property editor.
The Default button restores the default dwell-time list and preset settings.
Magnification
When storing / printing an image (while in Single image mode / Quad image mode / Large Image Window), the
databar magnification representation might not be correct. This functionality is activated by checking the Beam
menu / Magnification Correction item.
Magnification preferences
FIGURE 3-21:
The Screen preferences area sets the image databar magnification representation behavior while the File/Print
preferences area sets the storage / printing databar magnification representation behavior. Clicking the radio button
activates the correction technique:
• Real screen size: the imaging pixel width is handled.
– Active view: The databar magnification value depends on whether the Single or
Quad Image mode is selected. It is shown in the image databar and stored /
printed with an icon representing the Single / Quad Image mode.
– Single image / display mode: Single image mode magnification value is shown in
the databar and stored / printed with an image.
– Quad image / 4 display mode: the Quad image mode magnification value is shown in the databar and stored /
printed with an image.
• Polaroid 5": Polaroid film width is handled. A recalculated magnification value is shown in the
databar and stored / printed with an image.
• User device width (set by a user via the edit box): the recalculated magnification value is shown in
the databar and stored / printed with an image.
The Keep Screen and File / Print settings synchronized check box keeps both settings identical.
C O N F I D E N T I A L – limited rights
Revision A Feb 2018
Software control: Preferences dialog
User Manual 3-41