Thermo Scientific Apreo User's Operation Manual page 36

Save All (Ctrl + Shift + S)
opens a common dialog for saving images from each display,
providing an opportunity to change the file names and locations.
Record Movie (Ctrl + Shift + M)
allows a user to make digital video files (AVI) for dynamic
experiments. The corresponding icon next to this menu item – red
circle / square – indicates that movie recording is stopped / in
progress (see Chapter 5).
Print (Ctrl + P)
opens the print dialog enabling a choice of printer and settings
suitable for printing an image.
Import / Export
opens a sub-menu with choices for importable / exportable items. Selecting
an item opens a standard Open / Save As dialog for choosing the location and
file name. Following items can be imported (i.e. loaded and used) / exported:
• Stage Positions (.stg files) – stored stage positions
• Patterns (.ptf files) – active display parameters of (all) pattern(s)
By importing these parameters, (all) exported pattern(s) is/are drawn back
into the active display.
• Scanning Presets (.scp files) – preset scanning parameters
• Display Presets (.qps files) – active display parameters: Beam type / Detector type / Detector Mode / Detector
contrast & brightness / Digital Contrast / Digital Brightness parameters
• System Parameters (.par files)
A wide range of selected actual microscope settings are
stored, including most of those mentioned above. When
importing them back, only the selected settings are loaded.
Log Off #user name#
logs off the present User and provides the Log On dialog for the
next microscope user. When a user logs off, the system goes into
a safe state; the accelerating and detector voltages are
automatically switched off.

C a u t i o n !
Logging off the actual user does not close all microscope operations!
(see Chapter 2)
Enter Service Mode
starts the special mode intended for service actions.
Exit
closes the Microscope Control software (the actual user is
automatically first logged off) and leaves a user in the operating
system environment. The xT microscope Server is still running
and still controls the microscope in operation.

Edit menu
opens some helpful functions:
Undo (Ctrl + Z) / Redo (Ctrl + Y)
reverts / restores some of the last used actions.
Copy (Ctrl + C) / Cut (Ctrl + X) / Paste (Ctrl + V)
These functions are commonly used operating system functions.
Select All (Ctrl + A)
selects All graphics in the active display.
Delete (Delete)
deletes all selected graphics in the active display.
3-10 User Manual
Software control: Microscope Control
C O N F I D E N T I A L – limited rights
Feb 2018 Revision A