Thermo Scientific Apreo User's Operation Manual page 52

Scanning presets
By default, there are 6 factory toolbar Scanning presets (labeled s#).
Clicking on any one starts image acquiring with the corresponding
parameters.
Right-clicking on any Scanning preset button calls up the context menu:
• Clicking on the Activate item highlights the button (orange background) and starts image acquisition, or just
activates the preset according to the Scanning presets property editor / Shared Settings section / Start scan on left
click item setting (Yes / No). The Multiple Activate item has the same functionality in all compatible displays
(same beam).
Starting image acquisition is also possible using the Scan menu / Active Preset Snapshot (Ctrl + F2) item.
• Clicking on the Snapshot / Multiple Snapshot item starts snapshot acquisition from active / all compatible
displays.
• Clicking on the Update with Current Settings item updates the selected Scanning preset with the actual scanning
settings.
• Clicking on the Edit item opens the selected Scanning preset property editor. It is also possible to use the toolbar
down (expand) / up (hide) arrows with the same effect.
• It is possible to Import / Export Scanning Presets from / to a file (.scp).
• Clicking on the Reset to Default item brings all settings to their factory presets.
A tooltip is shown when the mouse cursor hovers over any preset button, giving the
parameters overview. The parameters colors indicate:
• Green: actual microscope setting matches the column preset
• Dark red: actual microscope setting differs from the column preset
• Gray: Value is not relevant when the respective component is switched off
3-26 User Manual
Software control: Microscope Control
C O N F I D E N T I A L – limited rights
Feb 2018 Revision A