Thermo Scientific Apreo User's Operation Manual page 54

Software control: Microscope Control
Clicking on some of the image databar fields induces an active menu related to it with appropriate
choices.
Clicking on the label field brings up the label-editing menu.
Double-clicking on the micron bar induces the Image properties window showing multiple
parameters at which an image was captured. The same functionality is caused by pressing the
Shift + F1 keys.
To set which information is included in the databar right-click on any display databar and click on
& drag the desired Available Item to the Visible Items field. Items can be placed in any order (by
dragging items up / down within the list). They expand or contract automatically to fit the display
width as long as there is enough room. This influences all displays with the same beam.
Databar configuration / Image properties
FIGURE 3-14:
To label a databar, double-click on the Label field and fill in the
dialog. It can be set independently for each display.
The Micronbar area scales to the magnification.
Clicking on the Choose Bitmap item opens a dialog to choose a
bitmap to be loaded into the databar (if the Bitmap item is ticked).
3-28 User Manual C O N F I D E N T I A L – limited rights
Feb 2018 Revision A