Thermo Scientific Apreo User's Operation Manual page 59

9. Stage module
consists of elements enabling:
• showing the numerical values of a particular position;
• showing the stage positions locations in a visual map form and
as a list for selection;
• navigating across the sample surface.

Note
The stage movement can be aborted by pressing the keyboard Esc key.
Don't hesitate to do so if you are not sure that the initiated movement
is safe!
10. Stage Z module
This module enables slowly moving the stage in the Z-axis direction.
The more the slider is pushed to the each side, the faster the
stage motion will be. Clicking on the slider bar moves the stage
by small steps.
11. Tilt Correction module
This module enables correcting the imaging distortion when tilting
the stage.
C O N F I D E N T I A L – limited rights
Revision A Feb 2018
Software control: Microscope Control
User Manual 3-33