Thermo Scientific Apreo User's Operation Manual page 60

12. Detector Settings module
enables choosing the active display detector and adjusting its
parameters.
The Detector list box contains the list of detectors actually
available for the active display (the same as the enabled items in
the Detectors menu). The detector actually used in the active
display is always shown.
The rest of the module dynamically changes according to the
selected detector and its parameters, which may change from
display to display.

13. Patterning Control module
A pattern type can be selected and handled by using the icon
buttons at the top of the module. It can be drawn in the active
display; it is then shown in the pattern list with a number. The
pattern properties can be changed via the Property module. The
Progress indicator shows the Overall / Current (pattern) Progress
(over time) of the actual patterning.





14. Properties module
Some features (Measurements, Annotations, Patterns) require an
individual set of parameters which are editable within this module,
by clicking on the edit field or the down arrow to choose a value.









16. Digital Zoom module
This procedure takes place in computer memory only and helps
navigate across the enlarged view. Click on the + / - button to
enlarge / reduce the view in an active display or to select a zoom
factor from the drop-down list. Click on the Undo button at the
top right side of the module (visible only when applicable) to
switch between the digital magnification last used and the normal
view.
Click on & drag the green bordered area inside the Digital Zoom
image, or move it by Ctrl + keyboard arrows, to change the
observed area in the active display. Change the observed area by
dragging the green borders. Press the Ctrl + + / – keyboard button
to enlarge / reduce imaging in the active display. When digital
zoom is applied, the magnifying glass icon appears in the
appropriate display.

3-34 User Manual
Software control: Microscope Control
C O N F I D E N T I A L – limited rights
Feb 2018 Revision A