Endress+Hauser Proline Promass E TB2 HART Operating Instructions Manual page 76

Commissioning
76
If the hardware write protection is disabled, the -symbol disappears in the header of the
measured value display and in the navigation view in front of the parameters.
5. Feed the spiral cable into the gap between the housing and main electronics module and plug
the display module into the electronics compartment in the desired direction until it engages.
6. Screw the electronics compartment cover closed and tighten the securing clamp.
Proline Promass E TB2 HART
A0013702
Endress+Hauser