Table of Contents
Advertisement
Proline Promass E TB2 HART
Endress+Hauser
5
Storage, transport, packaging disposal
5.1
Storage and transportation conditions
Observe the following notes for storage:
• Store in the original packaging to ensure protection from shock.
• Do not remove protective covers or protective caps installed on process connections. They prevent
mechanical damage to the sealing surfaces and fouling in the measuring tube.
• Protect from direct sunlight to avoid unacceptably high surface temperatures.
• Storage temperature: –40 to +80 °C (–40 to +176 °F), preferable for +20 °C (+68 °F)
• Store in a dry and dust-free place.
• Do not store outdoors.
5.2
Transporting the product to the measuring point
WARNING
Center of gravity of the measuring device is higher than the suspension points of the
webbing slings.
Risk of injury if the measuring device slips.
Secure the measuring device from rotating or slipping.
►
Observe the weight specified on the packaging (stick-on label).
►
Observe the transport instructions on the stick-on label on the electronics compartment cover.
►
Observe the following notes during transport:
• Transport the measuring device to the measuring point in the original packaging.
• Lifting gear
– Webbing slings: Do not use chains, as they could damage the housing.
– For wood crates, the floor structure enables these to be loaded lengthwise or broadside using a
forklift.
• For measuring device > DN 40 ( 1½ in): lift the measuring device using the webbing slings at the
process connections; do not lift at the transmitter housing.
• Do not remove protective covers or protective caps installed on process connections. They prevent
mechanical damage to the sealing surfaces and fouling in the measuring tube.
Storage, transport, packaging disposal
A0013897
15
Advertisement
Table of Contents
