Calling Up Remedial Measures - Endress+Hauser Proline Promass E TB2 HART Operating Instructions Manual

Proline Promass E TB2 HART
Endress+Hauser
Diagnostics event and event text
The fault can be identified using the diagnostics event. The event text helps you by providing
information about the fault. In addition, the corresponding symbol is displayed before the diagnostics
event.
Status symbol
Example
If two or more diagnostic messages are pending simultaneously, only the message with the highest
priority is shown. Additional pending diagnostic messages can be shown in the Diagnose list
submenu (® ä 84).
Past diagnostic messages that are no longer pending are shown in the Event logbook submenu
(® ä 88).
Operating elements
Operating functions in menu, submenu
Plus key
Opens the message about the remedial measures.
A0013970
Enter key
Opens the operating menu.
A0013952
12.2.2

Calling up remedial measures

X X X X X X X X X
20.50
1 Event text
2 Status symbol with diagnostics event
3 Event ID for service
4 Operation time of occurrence
5 Remedial measures
The user is in the diagnostic message.
1.
Press the O key ( symbol).
Diagnostics event
Status signal
¯
A0013962 A0013958
3-digit number
Message for remedial measures
S
X X X X X X X
Curr. output 1
mA
Curr. output 1
1
2
1. Check process
2. Check current output settings
5
Diagnostics and troubleshooting
Event number Event text
¯ ¯
441 Curr.output 1
X X
S441
i
(ID:153)
S441 2d11h05m55s
S
3
4
A0013940-EN
83