Endress+Hauser Proline Promass E TB2 HART Operating Instructions Manual page 57

Proline Promass E TB2 HART
Endress+Hauser
Parameter overview with brief description
Parameters
Assign current output 1-2 Select the process variable for
current output.
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Volume flow unit Select the unit for volume
flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Density unit Select the unit for density.
Result
The selected unit applies for:
– Current outputs
– Low value partial filled
– High value partial filled
– Simulation process
– Density adjustment (in the
Corrected volume flow unit Select the unit for corrected
volume flow.
Result
The selected unit applies for:
– Current outputs
– Low flow cut off
– Simulation process
Corrected volume flow Select the reference density
calculation for calculating the corrected
volume flow.
Reference density unit Select the unit for reference
density.
Result
The selected unit applies for:
– Current outputs
– Low value partial filled
– High value partial filled
– Simulation process
– Fixed reference density
– Density adjustment (in the
Description
• Off (only for current
output 2)
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
Unit picklist
variable
Unit picklist
variable
Unit picklist
pipe detection
pipe detection
variable
Expert menu)
Unit picklist
variable
• Fixed reference density
• Calculated reference
density
Unit picklist
pipe detection
pipe detection
variable
Expert menu)
Commissioning
Selection/ Factory setting
User entry
• Current output 1: mass
flow
• Current output 2: off
Country-dependent:
• kg/h
• lb/min
Country-dependent:
• l/h
• gal/min (us)
Country-dependent
• kg/l
• lb/cf
Country-dependent:
• Nl/h
• Scf/min
Calculated reference density
Country-dependent:
• kg/Nl
• lb/scf
57