Table of Contents
Advertisement
Diagnostics and troubleshooting
84
à The message for the remedial measures for the diagnostics event opens.
2.
Press S + O simultaneously.
à The message about the remedial measures closes.
12.3
Diagnostics event in the operating tool
If a diagnostics event is present in the operating tool, the status signal appears in the top left status
area along with the corresponding status symbol in accordance with NAMUR NE 107:
• Failure (F)
• Maintenance required (M)
• Function check (C)
• Out of specification (S)
Calling up remedial measures
1.
Navigate to the "Diagnostics" menu.
à In the "Actual diagnostics" parameter, the diagnostics event is shown with event text.
2.
On the right in the display range, hover the cursor over the "Actual diagnostics" parameter.
à A tool tip with remedial measures for the diagnostics event appears.
12.4
Diagnostic list
In the Diagnose list submenu, up to 5 currently pending diagnostic messages can be displayed. If
more than 5 messages are pending, the messages with the highest priority are shown on the display.
Navigation path
Diagnostics ® Diagnose list
Proline Promass E TB2 HART
A0014014-EN
Endress+Hauser
Advertisement
Table of Contents
