Diagnostics For The Configuration; Diagnostics For The Process - Endress+Hauser Proline Promass E TB2 HART Operating Instructions Manual

Proline Promass E TB2 HART
Endress+Hauser
12.5.4

Diagnostics for the configuration

Diagnostics event Event text
F410 Data transfer
F411 Up-/Download
C411 Up-/Download active Up-/Download active, please wait.
C431 Trim
F437 Configuration
incompatible
M438 Dataset
S441 Current output 1-2
C453 Flow override
C484 Simulation failsafe
mode
C485 Simulation process
variable
C491 Simulation current
output 1-2
12.5.5

Diagnostics for the process

Diagnostics event Event text
S801 Supply voltage
M803 Current loop 1-2
S830 Ambient temperature
range
S831 Ambient temperature
range
S832 Ambient temperature
range
S833 Ambient temperature
range
S834 Process temperature
S835 Process temperature
S842 Process limit value
S862 Partly filled
F910 Measuring tube does
not vibrate
Diagnostics and troubleshooting
Remedial measures
1. Check connection.
2. Retry data transfer.
1. Check connection.
2. Retry data transfer.
Carry out trim.
1. Restart device.
2. Contact service.
1. Check data set file.
2. Check device configuration.
3. Up- and download new configuration.
1. Check process.
2. Check current output settings.
Deactivate flow override.
Deactivate simulation.
Deactivate simulation.
Deactivate simulation.
Remedial measures
Supply voltage too low!
Increase voltage.
1. Check wiring.
2. Change I/O module.
Reduce the ambient temperature around the
sensor housing.
Increase the ambient temperature around the
sensor housing.
Electronics temperature is too high!
Reduce ambient temperature
Electronics temperature is too low!
Increase ambient temperature.
Reduce process temperature.
Increase process temperature.
Low flow cut off active!
Check settings for low flow cut off.
1. Check for gas in process.
2. Adjust detection limits.
1. Check process conditions.
2. Increase supply.
3. Check main electronic or sensor.
Event level from the
factory
Alarm
Alarm
Warning
Warning
Alarm
Warning
Warning
Warning
Alarm
Warning
Warning
Event level from the
factory
1)
Warning
Warning
1)
Warning
1)
Warning
1)
Warning
1)
Warning
1)
Warning
1)
Warning
Logbook entry only
1)
Warning
Alarm
87