Running the GTZ IBERT Demonstration
The GTZ IBERT demonstration example provided here operates all 8 lanes of the GTZ
transceiver at the same time.
The VC7222 board ships with one BullsEye cable while the provided example uses two cables
Note:
and activates all 8 GTZ lanes. In the absence of a second BullsEye cable, only one of the GTZ quads,
Q300A or Q300B (4 lanes), can be observed at a time.
Connecting the GTZ Transceiver and Reference Clocks
Figure 1-20
shows the locations for the two GTZ transceiver Quads (GTZ Quads Q300A and
Q300B) on the Rev. B VC7222 board.
X-Ref Target - Figure 1-20
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7222 IBERT Getting Started Guide
Figure 1-20: GTZ Quad Location
www.xilinx.com
28
Send Feedback