Running The Pci Express Pio Demonstration - Xilinx Virtex-6 FPGA ML605 Getting Started

Running the PCI Express PIO Demonstration

9.
10. The x8 PCI Express PIO design is pre-loaded on the ML605 board's Platform Flash XL.
11. Launch the PciTree tool and verify the menu shown in
X-Ref Target - Figure 1-30
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
Power on your PC and wait for your ML605 board to power up consequently.
Upon the board's power up and successful configuration of the onboard LX240T
FPGA, the DONE LED (DS13) should illuminate.
Figure 1-30: Launch the PciTree Tool
www.xilinx.com
Getting Started with PCI Express PIO Demonstration
Figure 1-30.
31