Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 49

7. A Customize IP window opens. In the Protocol Definition tab, change
LineRate(Gbps) to 13.0. Use the drop-down menu to change the Refclk(MHz) to
325.00. Do not change other defaults
X-Ref Target - Figure 2-5
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
(Figure
Figure 2-5: Customize IP - Protocol Definition
www.xilinx.com
Chapter 2: Creating the GTH IBERT Core
2-5).
Send Feedback
49