Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 26

Viewing GTH Transceiver Operation
After completing
configured and running. The status and test settings are displayed on the Links tab in the
Links window shown in
Note the line rate and the error count:
• The line rate for all four GTH transceivers is 13.0 Gb/s (see the Status column in
Figure 1-19).
• Verify that there are no bit errors.
X-Ref Target - Figure 1-19
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
step 6 in Starting the SuperClock-2
Figure 1-19.
Figure 1-19: Serial I/O Analyzer Links
www.xilinx.com
Chapter 1: VC7222 IBERT Getting Started Guide
Module, the IBERT demonstration is
26
Send Feedback