Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 62

3. In the Protocol Selection tab, set the Line Rate to 28.05 Gbps, and the reference
frequency to 255 MHz
The reference frequency can be set to any of the available options in the drop-down
Note:
menu. The same frequency should be set in the setup_scm2_freq_00_xx.tcl script by
modifying the set frequency statement.
X-Ref Target - Figure 3-3
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
(Figure 3-3).
Figure 3-3: Customize IP - Protocol Selection
www.xilinx.com
Chapter 3: Creating the GTZ IBERT Core
Send Feedback
62