Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 15

Figure 1-8 shows the VC7222 board with the cable connections required for the Quad 115
GTH IBERT demonstration.
X-Ref Target - Figure 1-8
Figure 1-8: Cable Connections for Quad 115 GTH IBERT Demonstration
Configuring the FPGA
This section describes how to configure the FPGA using the SD card included with the
board. The FPGA can also be configured through Vivado Design Suite using the .bit files
available on the SD card, or online (as collection rdf0297-vc7222-ibert-2015-1.zip)
at the Virtex-7 FPGA VC7222 Characterization Kit documentation
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7222 IBERT Getting Started Guide
www.xilinx.com
website.
Send Feedback
15