Xerox Phaser 3020 Service Manual page 32

17-100 IP Conflict Error Fault
The IP address conflicts with that of another system causing a machine communication error.
BSD-Reference: None
Procedure
1. Open the Easy Print Manager Application.
2. From the menu, select: [Machine Settings, Network Settings, Assign IP address].
3. Change the IP address.
If DHCP or BOOTP, reboot the machine to receive a new IP address.
Status Indicator RAPs
17-100 , 17-310
17-310 Communication Error (Main PWB to Wireless PWB)
Fault
The machine software has detected a communication error between the Main PWB and the
Wireless PWB.
BSD-Reference: None
Initial Actions
• Switch Off the power then switch On the power.
• Check the machine network and data configuration settings.
Procedure
1. Ensure that the connectors are fully seated between the Main PWB and the Wireless
PWB.
2. If the problem persists, replace parts in the following order:
• Flat Cable (Not Shown)
• Wireless PWB (REP 1.8),
• Main PWB (REP 1.6),
June 2014
2-10
PL 1.1.
PL 1.1.
Xerox® Phaser® 3020 Printer Service Manual