4.
Disconnect the Fuser Connectors
(Figure
Wire Guides
Figure 1 Fuser Connector and Wire Guides
Xerox® Phaser® 3020 Printer Service Manual
1).
Connector
NOTE: The top right (viewed from the rear) Tapered Plastic Screw is different than the other
plastic screws in the printer, make sure it is installed in the correct location during replacement.
5.
Remove the screws (3)
(Figure
Figure 2 Fuser Screws (Top View)
June 2014
4-21
2).
Screws
Repairs
REP 1.14