Xerox Phaser 3020 Service Manual page 62

Screwdriver Access Holes
Bottom View
Figure 3 Feed Rolls Assembly Screws Removal
Repairs
REP 1.11
7. Remove the Feed Rolls Assembly
a. Rotate the Feed Roll assembly up to release the locating pins from the frame.
b. Move the Feed Roll assembly up to the right and remove it.
Front View
8. Remove the Retard Pad
Be careful not to lose the Retard Pad Spring.
a. From the rear of the printer, release the Pivot Latches (2).
b. Move the Retard Pad into the printer to remove it.
June 2014
4-16
(Figure 4):
Figure 4 Feed Rolls Assembly Removal (Top View)
(Figure 5):
Xerox® Phaser® 3020 Printer Service Manual