Xerox Phaser 3020 Service Manual page 28

09-100 Print Cartridge Near End of Life Fault
The Print Cartridge life is less than 10%.
BSD-Reference: None
Procedure
1. Check the remaining life of the Print Cartridge by using one of the methods listed below:
• Print a Supplies Information Report. Refer to the Phaser 3020 User Guide, Section
1, Control Panel and Information Pages, for detailed information on using the Control
Panel buttons to obtain reports.
• Open Easy Printer Manager, check Toner Life. **VERIFY 'PRINT' OR 'TONER'?
• Open the CWIS application. Select; [Status, Supplies, Print Cartridge].
2. Check the remaining life of the Print Cartridge.
3. If the Print Cartridge has reached end of life, switch Off the power and replace the Print
Cartridge.
Status Indicator RAPs
09-100 , 09-350
GP 2
09-350 Print Cartridge End of Life Fault
The Print Cartridge has reached end of life.
BSD-Reference: None
Procedure
1. Check the remaining life of the Print Cartridge by using one of the methods listed below:
• Print a Supplies Information Report. Refer to the Phaser 3020 User Guide, Section
1, Control Panel and Information Pages, for detailed information on using the Control
Panel buttons to obtain reports.
• Open Easy Printer Manager, check Toner Life.
• Open the CWIS application. Select; [Status, Supplies, Print Cartridge].
2. Check the remaining life of the Print Cartridge.
3. If the Print Cartridge has reached end of life, switch Off the power and replace the Toner
Cartridge.
June 2014
2-6
GP 2
Xerox® Phaser® 3020 Printer Service Manual