Table of Contents
Advertisement
2.10
Beginning Configuration
The card access controller is now ready for configuration.
The card access controller may be configured remotely using the optional modem
board TX3-MDM Modem Module.
See the following documentation:
•
To start the configuration
1.
2.
3.
TX3-CX Card Access System Installation and Operation Manual
34 (56)
Copyright 2009
LT-995 Configuration and Administration Guide
Ensure that the controller is fully operational.
Connect the PC to the controller using the USB port.
Configure the Card Access system using the Configurator Program TX3-
MSW and the LT-995 Configuration and Administration Guide.
Installation and Setup
Version 1.00.3
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers