Table of Contents
Advertisement
If a card is assigned an access level 2 it means the user can have access to reader
A during the office hours and will have access to reader B all the time.
3.3.10
Controller options
The following controller options are configurable:
Card format. The following card formats are supported:
•
•
Send real time logs. If enabled, only the real time logs are sent to the PC.
Interlock feature. If enabled, door B cannot be unlocked until door A is locked
and closed. Door A cannot be unlocked until door B is locked and closed.
Facility code. Facility code is set to any value from 0 to 4294967294 and is used
in the facility code mode. The default is 0.
3.3.11
Access point options
The following access point options are configurable:
Auto relock. Enabling this option locks the door when the door closes before the
door open timer or extended door timer expires. Disabling this option locks the
door, but only after the expiration of door open timer or extended door open
timer.
Temporary card. Cards designated as temporary with the usage count and 'auto
card expiration' option enabled, causes a counter to deduct by one every time this
card is used at the access point. When is reaches zero, the card deactivates.
Disable forced entry alarm. Disabling the forced entry alarm will not activate
the forced entry alarm even if the door is opened without permission. Instead an
access granted sequence is started. This is usually used on access points where
there is no request to exit (RTE) device.
PC decision required. When enabled the PC decision to grant access is
transferred to the PC from the controller. For this option to work the PC needs to
be on all the time with an attendant. Use this option when the building has a
security desk or a concierge.
First person delay. Configuring the access point for the lock/unlock schedule,
causes the door to remain locked at the start of the unlock schedule, until the first
valid card is presented to the card reader. The door continues to remain unlocked
during the unlock schedule.
TX3-CX Card Access System Installation and Operation Manual
42 (56)
Copyright 2009
26 bit standard
37 bit (Mircom proprietary)
Configurable Features
Version 1.00.3
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers