Keypad Navigation; Beginning Configuration - Mircom TX3 SERIES Programming Manual

2.1

Keypad Navigation

Figure 1 shows how to use the keypad when in CONFIGURATION MODE.
Note that the keypad buttons can have different functions when creating resident
entries. Refer to 2.7.1 Adding a New Record and Table 1: List of Screens for
more information.
In configuration
mode
*
Press to move
left.
#
Press
and un-checking the check box
Figure 1.
2.1.1 Exiting Configuration Mode
You can exit the configuration mode at any time.
To exit configuration mode
1.
2.2

Beginning Configuration

To configure the Telephone Access panel, you must first enter the configuration
mode.
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
to move right for checking
Keypad Navigation
To exit the configuration mode, press the info key
previous menu.
Configuration
In configuration
mode
Press to scroll up
Press to scroll
down.
Press to enter
and confirm selection.
Press to cancel
the selection or exit
to return to the
11