Output To Panels; Duration; Schedule; Access Criteria - Mircom TX3 Series Installation And Operation Manual

3.2.4

Output to panels

Correlations are applied across the network. Actions are specified to occur on the
local panel, specific panels or all the panels on the network.
3.2.5

Duration

The duration of the action is specified in minutes and seconds, or indefinitely.
3.2.6

Schedule

The schedule lets you specify when correlated events take effect.
3.3

Access Criteria

The configurator software monitors the functional state of inputs from all panels
and devices, and autosenses the on/off status of connected components. Outputs
are programmed for specific functionality, such as specific delay and on/off
times.
Granting access depends on different criteria, such as security precautions and
the access privileges granted the card holder. To prevent unauthorized access the
controller has various configurable features for determining the conditions and
type of access.
Access requirements are a function of schedule, holidays, security precautions
and access privileges. The parameters are configurable and allow for very
detailed system operation. For example access privileges may have
dependencies and consequently may be more suitable to run as a scheduled task.
The configurator software lets you define and configure the various modes of
operation for managing access, defining inputs and assigning outputs. In order to
effectively use the configurator you must understand these configurable features.
The following features are configurable:
•
•
•
•
•
•
•
•
TX3-CX Card Access System Installation and Operation Manual
38 (56)
Copyright 2009
Lock / Unlock
High security
PC decision required
Facility code
Card + Pin
Anti-pass-back
Temporary card
Interlock
Configurable Features
Version 1.00.3