About This Manual; Manufacturer And Service - CEStronics OMEGA FLEX Assembly And Operating Manual

Electronic fitting rfid furniture lock

Hide thumbs Also See for OMEGA FLEX:

Table of Contents

1.1 Manufacturer and service

1 About this manual

These installation and operating instructions, hereinafter referred to as "manual", will help you with the

installation and the intended, safe and advantageous use of the electronic hardware you have purchased.

Every person who assembles, administrates, maintains or disposes of electronic fittings must have read and

understood the complete content of these manual.

If you do not understand certain functions of the OMEGA FLEX system, please contact your CEStronics

partner for further information.

This manual must be treated as a part of the product and must be kept for the entire service life of the

product. The manual should also be given to any subsequent user or owner of the product.

The information and data in these documents are subject to change without prior notice. No part of this

document may be copied or distributed for any purpose without the express written consent of C.Ed.

Schulte GmbH Zylinderschlossfabrik.

BRO2306 -2

Version: VA1

Always use the most up-to-date version of this manual. You can obtain updated versions free of

charge from www.ces.eu.

Notes on trademark protection

MIFARE, MIFARE Classic, MIFARE Ultralight and MIFARE DESFire are registered trademarks of NXP B.V. and

are used under licence.

C.Ed. Schulte GmbH

Zylinderschlossfabrik

Friedrichstr. 243

42551 Velbert, Germany

Page 4 of 84

Tel: +49 (0) 2051-204-0

Fax: +49 (0) 2051-204-229

www.ces.eu

info@ces.eu

RFID furniture lock

Table of Contents

Table of Contents