Hysteresis Setting - Fuji Electric ZPAF Instruction Manual

6.3.2 Hysteresis setting

esis.
ENT
ENT
To close "Hysteresis Setting"
To close the "Hysteresis Setting" or cancel
the mode midway, press the
A previous screen will return.
Setting range
0 to 20% of full scale
[% full scale (% FS)] represents the
percentage with the width of the component
measurement range regarded as 100%.
Hysteresis (In case of upper limit alarm)
Hysteresis
width
Alarm
Contact output
Alarm Setting
key
ESC
key.
32
Set Hysteresis
0 to 20%FS available
Alarm-1
Alarm-2
Alarm-3
Alarm-4
Alarm-5
Hysteresis
0 0
%FS
(
End of Hysteresis Setting
Upper limit value
ON (closed)
OFF (open)
ENT
)
INZ-TN2ZPAF-E