6.3.2 Hysteresis setting
esis.
ENT
ENT
To close "Hysteresis Setting"
To close the "Hysteresis Setting" or cancel
the mode midway, press the
A previous screen will return.
Setting range
0 to 20% of full scale
[% full scale (FS)] represents the percentage
with the width of the component measurement
range regarded as 100%.
Hysteresis (In case of upper limit alarm)
Hysteresis
width
Alarm
Contact output
INZ-TN2ZPAJ-E
-
key
ESC
key.
37
(
End of Hysteresis Setting
Note
The hysteresis is common to all alarms
(components).
Hysteresis in peak alarm setting
described in Section 6.3.3 should be set
separately.
Upper limit value
ON (close)
OFF (open)
-
ENT
)
-