Function And Use; Configuration - 2N IP Force 9151101W Installation Manual

3. Function and Use

In this section we describe the basic and extending functions of the 2N
Force product.
Here is what you can find in this section:
•

3.1 Configuration

• 3.2 Control
• 3.3 Maintenance
• 3.4 Downloads
3.1 Configuration
Use a PC equipped with any web browser to configure 2N
• Launch your web browser (Internet Explorer, Firefox, etc.).
• Enter the IP address of your intercom (http://192.168.1.100/, e.g.).
• Log in using the Admin user name and 2n password.
You have to know the IP address of your device to log in to the integrated
web server. By default, 2N
mode, i.e. it obtains the IP address automatically if a properly set DHCP
server is available in your LAN. If no such DHCP server is available, you can
®
operate 2N IP Force in the static IP address mode.
If your device remains inaccessible (you have forgotten the IP address, or the
LAN configuration has changed, for example), change the LAN settings using
the buttons on the device.
IP Address Retrieval
Take the following steps to retrieve the 2N
• Connect (or, if connected, disconnect and reconnect) 2N
• Wait for the second sound signal
• Press the first quick dial button 5 times.
®
• 2N IP Force will read its IP address.
• If the address is 0.0.0.0, it means that the intercom has not obtained the IP address from the DHCP server.
®
IP Force is switched into the dynamic IP address
.
Installation manual 2N® IP Force
®
®
IP Force IP address:
®
IP Force to the power supply.
®
IP Force:
101 / 118
IP