Connection of the 2N IP intercoms Card Reader to a security system unit is a
typical example of application.
Function:
®
The 2N
Wiegand Isolator separates galvanically a two-wire Wiegand bus in
one direction and a status LED signal in the other direction. The module is
power supplied from the Wiegand bus receiver side.
Specifications:
•
2-wire WIEGAND IN
•
2-wire WIEGAND OUT
•
LED IN switched against GND on WIEGAND OUT side
•
Open LED OUT switched against GND on WIEGAND IN side (up to 24 V / 50 mA)
•
5 to 16 V / 10 mA power supply from Wiegand bus receiver side
•
500 V DC isolation strength
Installation manual 2N® IP Force
93 / 118