2N IP Force 9151101W Installation Manual page 116

Installation manual 2N® IP Force
The manufacturer shall not be held liable for any damage of the product
arising during the shipping thereof.
The manufacturer shall not make any warrant with regard to data loss or
damage.
The manufacturer shall not be liable and responsible for any direct or
indirect damage incurred as a result of a use of the product in contradiction
herewith or a failure of the product due to a use in contradiction herewith.
All applicable legal regulations concerning the product installation and use
as well as provisions of technical standards on electric installations have to
be obeyed. The manufacturer shall not be liable and responsible for damage
or destruction of the product or damage incurred by the consumer in case
the product is used and handled contrary to the said regulations and
provisions.
The consumer shall, at its own expense, obtain software protection of the
product. The manufacturer shall not be held liable and responsible for any
damage incurred as a result of the use of deficient or substandard security
software.
The consumer shall, without delay, change the access password for the
product after installation. The manufacturer shall not be held liable or
responsible for any damage incurred by the consumer in connection with the
use of the original password.
The manufacturer also assumes no responsibility for additional costs
incurred by the consumer as a result of making calls using a line with an
increased tariff.
Electric Waste and Used Battery Pack Handling
Do not place used electric devices and battery packs into municipal waste
containers. An undue disposal thereof might impair the environment!
116 / 118