2N IP Force 9151101W Installation Manual page 28

2N Part No. 9159052
Axis Part No. 01393-001
2N Part No. 9134174
Axis Part No. 01385-001
2N Part No. 9159014EU/
UK
2N Part No. 9159014US
Axis Part No. 01404-001
®
• Power supply for 2N
• External power supply for the induction loop
• Input 230 V AC
• Output 12 V DC
• Mifare Classic 1k RFID fob, 13.56 MHz
®
• 2N 2Wire
• (set of 2 adaptors and power source for EU/US/UK)
®
• The 2N 2Wire converter allows you to use the existing wiring (2
wires) from your original doorbell or door intercom to connect
any IP device. You do not have to configure anything; all you need
®
is a 2N 2Wire unit at each end of the cable and a power source
connected to at least one of these units.
®
The 2N 2Wire unit then provides PoE power not only to the
second converter, but also to all the other connected IP end
devices.
Installation manual 2N® IP Force
Induction Loop
28 / 118