Table of Contents
Advertisement
Function:
®
The 2N
IP Force Internal RFID Card Reader adds two logical inputs, two
additional switches and a tamper switch to the 2N
The purpose of the tamper switch is to signal any unauthorised opening of
the intercom (to prevent a theft, e.g.). It is recommended to use the tamper
switch.
Tip
•
FAQ:
Tamper switch – How to install it into the 2N
Specifications:
Card reader
•
Operating frequency: 13.56 MHz
•
Minimum reading distance: 30 mm above 2N
•
RFID card reader 9151031S is compatible with cards (optionally card serial number or PAC ID is read):
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
®
•
2N
Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
•
RFID card reader 9151019 is compatible with cards (optionally card serial number or PAC ID is read):
•
ISO14443A (Mifare, DESFire)
•
PicoPass (HID iClass)
•
FeliCa
•
ST SR(IX)
®
•
2N
Mobile Key
•
HID SE (Seos, iClass SE, Mifare SE)
Relay output
•
Switching contact
•
30 V / 2 A AC/DC
®
IP Force
®
IP Force cover
Installation manual 2N® IP Force
9151031S
®
IP Force basic unit.
82 / 118
Hide quick links:
Advertisement
Table of Contents
