Refer to the Configuration Manual for details of Wiegand, outputs and reader.
Refer to the Automation manual for details of input, red LED and tamper
function and use.
Connection:
Internal secured RFID Card Reader 13.56 MHz
The Internal RFID Card Reader 13.56 MHz (Part No. 9151031S/9151019) is
used for reading RFID card Ids in the 13.56 MHz band, NFC supported. This
module is intended for mounting into the 2N
9151101CRPW, 9151101CHRPW, 9151102RW, 9151102CRW a 9151102CHRW.
These models have an window, which is necessary for antenna operation. If
the Internal RFID Card Reader is installed, it is not possible to install
the Additional Switch.
9151019
®
IP Force model 9151101RPW,
Installation manual 2N® IP Force
81 / 118