Installation manual 2N® IP Force
Version 5
Version 4 and lower
Internal RFID Card Reader 125 kHz
The Internal RFID Card Reader 125 kHz (Part No. 9151011) is used for
reading RFID card Ids in the 125 kHz band. This module is intended for
®
mounting into the 2N
IP Force model 9151102CR, 9151102R, 9151101CRP
and 9151101RP. These models have an window, which is necessary for
antenna operation. If the Internal RFID Card Reader is installed, it is not
possible to install the Additional Switch.
Function:
®
The 2N
IP Force Internal RFID Card Reader adds two logical inputs, two
®
additional switches and a tamper switch to the 2N
IP Force basic unit.
68 / 118