2N IP Force 9151101W Installation Manual page 53

• We recommend the use of a shielded SSTP Ethernet cable.
External Power Supply Connection
®
2N IP Force can be fed either from an external 12 V ±15 % / 2 A DC power
supply or from the LAN equipped with the PoE 802.3af supporting network
elements.
External Power Supply
An external 12 V power supply is connected to terminal block X19. Use a 12 V
± 15 % DC power source dimensioned to current intake of 2 A at least (Part
No. 91341481E) to ensure a reliable function of your device.
PoE Supply
®
2N IP Force is compatible with the PoE 802.3af (Class 0–12.95 W)
technology and can be supplied directly from the LAN via compatible
network elements. If your LAN in incompatible, insert the PoE injector, Part
No. 91378100E/US, between
®
2N IP Force and the nearest network element.
Electric Lock Connection
®
2N IP Force is equipped with an electrically isolated relay switch with NO
and NC contacts (terminal block X17, max. 30 V / 1 A AC/DC) and 9 up to 13 V
DC depending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1 V), max 600 mA switched output (terminal block X18), to which a
standard electric lock or another compatible electrical appliance can be
connected.

Note
• Devices with PCB version 555v3 and higher provides independent control of 12 V switched output
(terminal block X18) and relay switch (terminal block X17). Devices with PCB version 555v2 have
both outputs switched simultaneously.
Installation manual 2N® IP Force
53 / 118