2N IP Force 9151101W Installation Manual page 110

• MJPEG
• Low quality: QVGA (320 x 240), 10 fps, quality 70: 435 kbps with headers
• Medium quality: VGA (640 x 480), 15 fps, quality 85: 506 kbps
• High quality: SXGA (1280 x 960), 15 fps, quality 95: 8 Mbps
Interface
• Power supply: 12 V ±15 % / 2 A DC or PoE
• PoE: PoE 802.3af (Class 0–12.95 W)
• LAN: 10/100BASE-TX s Auto-MDIX, RJ-45
• Recommended cabling: Cat-5e or higher
• Supported protocols: SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF
• Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
• Active switch output: 9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1 V), max 600 mA
RFID card reader
• Optional
• Includes besides card reader itself: Wiegand interface, tamper switch, active output, relay, two inputs
• Supported cards on 125 kHz version, Part No. 9151011
• EM4100, EM4102
• Supported cards on 13.56 MHz version, Part No. 9151016 (only card serial number is read)
• ISO/IEC 14443A
• Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
• ISO/IEC 14443B
• CEPAS, HID iCLASS
• JIS X 6319
• Felica
• Supported cards on 13.56 MHz NFC version, Part No. 9151017 (only card serial number is read)
• ISO/IEC 14443A
• Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
• ISO/IEC 14443B
• CEPAS, HID iCLASS
• JIS X 6319
• Felica
• ISO/IEC 18092
• SmartPhone with NFC/HCE support, since Android version 4.3
• Supported cards on secured 13.56 MHz NFC version, Part No. 9151019 (optionally card serial number or
PAC ID is read)
• ISO/IEC 14443A
• Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
• ISO/IEC 14443B
• CEPAS, HID iCLASS
• JIS X 6319
• Felica
• ISO/IEC 18092
• SmartPhone with NFC/HCE support, since Android version 4.3
• Wiegand Interface: Input/Output mode, located on RFID card reader module
• Active switch output: 9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1 V), max 600 mA
• Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Additional switch
Installation manual 2N® IP Force
110 / 118