Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for 2N Helios Vario
Summary of Contents for 2N Helios Vario
- Page 1 ® Helios Vario Door Access Intercom Installation Manual Version www.2n.cz ...
- Page 2 Declaration of Conformity see the CD-ROM (if enclosed) or our website at www.2n.cz. The 2N TELEKOMUNIKACE a.s. is the holder of the ISO 9001:2009 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products.
-
Page 3: Table Of Contents
Content 1. Product Overview ........4 1.1 Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ... -
Page 4: Product Overview
The connectivity of the unit is flexible in that as standard the unit can connect to any telephone system via either an analogue extension or trunk port. The 2N® Helios unit can also connect to any network provider's analogue telephone line. - Page 5 Electronic volume and Hands-Free control – no need to open cover Operates on any analogue telephone line Stable line power feeding High acoustic quality Special functions includes automatic dialling of multiple numbers, silent dialling, departure/arrival, day/night mode, second switch delay ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 6: Changes
Detection of all dual tones - new parameter 946 New parameter 975 – extended message options for automatic calls New function 995 – software version identification Language selection: English, German, Portuguese, Dutch Programming: Cancelling by # is possible in any state ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 7 ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 8: Components And Associated Products
1.2 Components and Associated Products Basic and Extender Units ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 9 All the above-mentioned units can be wall mounted without requiring any additional accessories. All the basic units can be complemented with a camera, proximity reader ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 10 ® otherwise. The box with frame (without roof) allows for installation of Helios indoor applications so that the unit does not practically stick out (up to 1 mm). ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 11 Quality / data flow control option. Free SW for monochrome mode intelligent recording of the video record into a PC automatically. (includes movement detection). Supplementary infrared light. Horizontal/vertical tilting option. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 12 Siemens switching, up to 48 backlight. HiPath Telephon V / 2 A. system Part No. Part No. 9135302E Part No. 9135301E 932928E double-button name plate name plate 12 V Transformer ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 13: Terms And Symbols Used
Warning Always abide by this information to prevent damage to the device. Caution Important information for system functionality. Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 14: Description And Installation
Here is what you can find in this section: 2.1 Before You Start 2.2 Mechanical Installation 2.3 Electrical Installation 2.4 Camera Installation 2.5 Extending Module Connection 2.6 Buttons Labels – Insertion, Replacement 2.7 Mounting – Completion ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 15: Before You Start
1× Transparent name plate foil of size A5 1× Spare name plate 2× Screws 2× Dowels Note If you have bought a complete 'packet', the delivery may contain additional items including instructions for use and lists of available parts. ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 16: Mechanical Installation
(sheds, passages. e.g.). Outdoor Environments where the product is exposed application to rain or where water may flow down the means walls (fence, outer wall of a building, e.g.). ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 17 The product is not designed as a burglar protection device except when used in combination with a standard lock, which has the security function. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 18 Insert the included dowels in the wall holes. ® Use the hexagon key wrench included in the supply and remove the 2N Helios metal cover. Remove the screw in the lower part of the metal cover and fold out the cover.
- Page 19 Carry the supply cables (Ethernet, lock, power cables) to the basic module box through one of the holes. Seal the screw hole carefully with some cement or non-aggressive silicone to avoid water infiltration. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 20 Connect the cables as described in subsection 2.4, Mounting – Electrical Installation. Make sure that the cables are not squeezed while installing the plastic cover. For the correct cable installation. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 21 ® Remove the protective foil from the display (for display-equipped 2N Helios versions only). Make sure that the cables are placed properly inside and that none of them obstructs a perfect cover closure. Make sure that the three loudspeaker holder feet fit into the board holes. Keep the required loudspeaker position to make the seal work properly.
- Page 22 The product is not designed as a burglar protection device except when used in combination with a standard lock, which has the security function. ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 23: Electrical Installation
Switch 2 connector Keypad backlight connector Connector for non-standard functions Microphone connector Keypad connector Extension unit connector Serial number Main microprocessor Configuration jumper block Right connector Jumpers Camera connector Camera setting jumpers Loudspeaker connector and panel grounding ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 24 VIDEO – Video signal output – used only if a camera unit is included. The coaxial cable is connected with an internal conductor to +, with shielding to −. Description of Jumpers Connector (8) ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 25 Connect the lock according to the figure, which shows the button backlight supply too (see later). Dc-supplied lock: Practically all locks can be dc and ac supplied. The ac supply is more advantageous because the lock buzzes, which is the clearest signalling method ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 26 2-wire first and then the UTP cable to prevent the 2-wire cable from falling out. You can also fit the cables with common clamp tape. Warning An improper cable arrangement may cause a malfunction of the product. Before closing the cover, check all wires and the cover for perfect closing. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 27 – see the figure below. Other reasons for such connection are the effort to minimise consumption from the back-up supply (which supplies the lock, not the backlight), or just that two weaker power supplies are available ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 28 A new additional switch, Part No. 9135250E, has been designed for Helios . It can be mounted into any basic unit, as an added option. To connect it, follow the instructions included in the switch delivery. ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 29: Camera Installation
(Part No. 9134137, MPEG4 LAN video server). A coaxial or twisted cable can be used for connection. ® A sight glass is included in the delivery, which replaces the non-transparent 2N Helios basic unit sight glass imitation. To install the camera, follow the instructions that come with it. -
Page 30: Extending Module Connection
The basic unit is always on the left. Extenders are chain-connected, i.e. each is linked with its neighbour. The cable cannot be driven through the box interconnecting holes until the boxes have been connected (see subsection 2.3 Mounting – Mechanical Installation). Figure: 8-Button Extender Module Connection to Basic Unit ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 31 Maximum Count of Extenders 9135181E (1×8 buttons) 9135182E (2×8 buttons) The table above shows how to combine modules with single (whole) and double buttons. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 32 Installing the info panel name plate, order No. 9135311E, into any of the extending modules will not change the numbering system (the buttons on the info panel sides will remain functional). Connecting the info panel module, order No. 9135310E, will result in omission of eight numbers. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 33 ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 34: Buttons Labels - Insertion, Replacement
Remove the name plates as shown in the figure using, e.g., a screw driver. Remove the name plate inserts as shown in the figure. Insert the labels printed on foil (see later). Replace the name plate inserts. ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 35 Make sure that the text does not cover up the red arrows printed on the name plate, we recommend you to print the foil using a template (MS Word), available at www.2n.cz in section "Downloads", direst link: Template - name tags ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 36: Mounting - Completion
Most Frequent Mounting Errors For illustration, a part of the plastic cover is removed in the figures below to reveal the sealed loudspeaker and the cover-seal touch point. The cross section plane is marked white for better orientation. ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 37 ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 38: Configuration
3. Configuration ® This section describes the Helios configuration. Here is what you can find in the section: 3.1 Programming 3.2 Full Parameter Chart 3.3 Function Description 3.4 Section for Advanced Users 3.5 Maintenance 3.6 Downloads ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 39: Programming
A three-digit parameter number is assigned to every parameter to be programmed ® and to every memory (refer to the Programming Chart). This number indicates to 2N Helios which parameter to change, and is used as "Enter". When it is entered, ®... - Page 40 The switch password may not be identical with any Arrival/Departure, Day/Night, or service password. For password selection tips see the Instructions for Keypad Use. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 41 If you make a typing error, cancel the entered value with . Then you can re-enter the whole number. ® If you enter an incorrect parameter number or parameter value, 2N Helios sends a refusal signal and you have to start with the parameter number again. ®...
- Page 42 If You Forget the Service Password If you forget the service password, contact the manufacturer. The manufacturer can change your service password to 12345 remotely without altering any other parameter. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 43 ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 44: Full Parameter Chart
0 = switch disabled time Dialling type 0–1 1 = pulse 40/60 tone Dialling timeout 8 = 0,8 5–99 Range of 0,5 s – 9,9 s after pick-up DTMF transmitting 0–12 1 step = 1 dB level ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 45 0–255 0.08s used for call termination and duration automatic dialling. Maximum busy 70 = tone or pause 0–255 0.7s duration Maximum 10 = tone-pause 0–255 0.1s difference Minimum count of busy tone 2–9 periods ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 46 0 = no by pressing 2nd 1 = yes button Count of There is a 3-second pause message 0–9 between every two messages. repetitions Intercom The number enables intercom identification 16 digits identification. number ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 47 Deletion of all Service 12345 Deletes password 00 too. switch passwords password Clearing of all 12345 Clears memories 01 to 55. memories Warning! Changes the service Full initialisation 12345 password too (setting the defa value of 12345). ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 48 1 is activated. Useful where two doors are close to each other. (The numbers in the figure are parameter numbers.) The parameters can be set to overlap activation of the two switches: Explanation of Parameters 951, 952, 953 Ringing tone (example) ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 49 Since the tone – pause difference is 500 − 250 = 250 ms, set parameter 944 to 300 ms, for example. Note ® Increase parameter 944 also when Helios is placed in a hall or corridor with a large decay time. ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 50: Function Description
® If a button is pressed that has no number stored within it 2N Helios picks up the line, sends a refusal tone (refer to the Signals Overview) and hangs up. - Page 51 From Internal User's View (Survey of Functions) ® Calling to 2N Helios ® You call the appropriate extension and Helios makes the call and gives a confirmation tone after two rings (or as pre-programmed). Now you can speak and ®...
- Page 52 The voice menu considerably helps with programming Helios . Having entered the programming mode, you can also alter any parameter and memory settings. Caution ® The above mentioned functions (except for calls to Helios ) require tone-dialling telephone set. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 53 UK, the U.S.A. (the so-called BTT tone) and in Canada. This new function does not require setting of any parameter. One of the tone components must be of 440 Hz. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 54 It is used in combination with automatic information systems, voice mailboxes, etc., which ask the calling party to select a service using tone dialling. This function, however, does not allow you to call destinations other than the pre-programmed ones. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 55 01…54 – the number that complies with the selected button (memory) is dialled after a timeout. – If an asterisk is pressed after number 01…54, the number is dialled immediately unless it is identical with the set password. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 56 It is not recommended to use such passwords as 3333. This leads to a considerable wear and tear of one button and an unauthorised person may guess your password easily. It is ideal to employ all keys evenly, using several codes for different persons or groups. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 57 ® 2N Helios Statuses and Available Operations Outgoing Incoming Telephone Operation Hang-up Programming call call mode Button pressing – × — — new call Call extension – — — DTMF Call termination – — DTMF Hang-up upon continuous, busy —...
- Page 58 (but not vice versa!). ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 59: Section For Advanced Users
Ringing tone, 10 rings are made Hangs up and dials the next number. (the count of rings is variable) These digits are interpreted as password beginning. Call extension or password beginning. Hang-up command. ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 60 However, this may only decelerate automatic dialling (the busy tone may not be recognised, ® e.g.). Even if Helios cannot identify the DTMF, the connection is established (yet for a shorter time). ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 61 Message re-plays (once) Call extension: a call is extended by 30 seconds by this command. Can be used repeatedly. Call termination These digits are interpreted as a password beginning – for switch control. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 62 Portuguese ..... language. Dutch ..... Arrival/Departure, Day/Night Modes ® Helios can identify easily where to 'route' (switch) a call after a button is ® pressed. All you have to do is call Helios and enter the following: ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 63 Button 01: labelled The Johnsons, memory 1 = living room, 2 = workshop, 3 = Mr. Johnson's mobile telephone, 4 = Mrs. Johnson's mobile telephone. Arrival/Departure password for button 01 is 333. ® The family is leaving for holiday. They call 2N Helios and enter: ®...
-
Page 64: Maintenance
The manufacturer reserves the right to modify the product in order to improve its qualities. ® Helios contains no environmentally harmful components. When the product's service life is exhausted and you would like to dispose of it please do so in accordance with applicable legal regulations. ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 65: Downloads
3.6 Downloads Templates Nametags ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 66 ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 67: Technical Parameters
4. Technical Parameters This section describes the technical parameters of the product. Telephone Parameters ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 68 Backlight – max. voltage: 14 V Backlight – current consumption: Up to 1 A Working temperature: −20 °C to +60 °C Coverage: IP 53 Dimensions (1 module): (210 × 100 × 29) mm Weight: up to 500g ® TELEKOMUNIKACE a.s., www.2n.cz...
-
Page 69: Supplementary Information
5. Supplementary Information This section provides supplementary information of the product. Here is what you can find in this section: 5.1 Troubleshooting 5.2 Directives, Laws and Regulations 5.3 General Instructions and Cautions ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 70: Troubleshooting
5.1 Troubleshooting For the most frequently asked questions refer to faq.2n.cz ® TELEKOMUNIKACE a.s., www.2n.cz... -
Page 71: Directives, Laws And Regulations
5.2 Directives, Laws and Regulations Europe ® Helios Vario conforms to the following directives and regulations: Directive 1999/5/EC of the European Parliament and of the Council, of 9 March 1999 – on radio equipment and telecommunications terminal equipment and the mutual... -
Page 72: General Instructions And Cautions
The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff. ® TELEKOMUNIKACE a.s., www.2n.cz... - Page 73 Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or short-circuited either. ® TELEKOMUNIKACE a.s., www.2n.cz...
- Page 74 2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Phone: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz ® TELEKOMUNIKACE a.s., www.2n.cz...