2N IP Force 9151101W Installation Manual page 75

Recommended Wiring Diagram for Reader with Open Collector (OC)
Output
Internal RFID Card Reader 13.56 MHz
The Internal RFID Card Reader 13.56 MHz (Part No. 9151031/9151017) is
used for reading RFID card Ids in the 13.56 MHz band, NFC supported. This
module is intended for mounting into the 2N
9151101CRPW,
9151102CHRW. These models have an window, which is necessary for
antenna operation. If the Internal RFID Card Reader is installed, it is not
possible to install the Additional Switch.
9151031
Function:
®
The 2N IP Force Internal RFID Card Reader adds two logical inputs, two
additional switches and a tamper switch to the 2N
9151101CHRPW,
®
IP Force model 9151101RPW,
9151102RW,
®
IP Force basic unit.
Installation manual 2N® IP Force
9151102CRW
9151017
and
75 / 118