Function And Use; Configuration - 2N IP Verso Installation Manual

3. Function and Use

This section describes the basic and extending functions of the the 2N
Here is what you can find in this section:
•

3.1 Configuration

• 3.2 Intercom Control as Viewed by External User
• 3.3 Touch Display Intercom Control As Viewed by External User
• 3.4 Intercom Control as Viewed by Internal User
• 3.5 Maintenance
• 3.6 Downloads
3.1 Configuration
®
Configure 2N IP Verso using your PC with any internet browser:
• Launch your internet browser (Internet Explorer, Firefox, etc.).
• Enter the IP address of your intercom (http://192.168.1.100/, e.g.).
• Log in using the username Admin and password 2n.
You have to know your intercom IP address to log in to the integrated web server. Upon
®
purchase, 2N IP Verso is set to the dynamic IP address mode – it retrieves the IP address
automatically if there is a properly configured DHCP server in the LAN. If no DHCP is available,
®
operate 2N IP Verso in the static IP address mode. Refer to the Configuration Manual for
®
the 2N IP Verso configuration details.
If your device remains inaccessible (you have forgotten the IP address, the network
configuration has changed, etc.), you can change the network configuration using the device
buttons.
IP Address Retrieval
Take the following steps to retrieve the 2N
• Connect (or, if connected, disconnect and reconnect) 2N
• Wait for the second sound signal
• Press the quick dial button on the main unit 5 times.
®
• 2N IP Verso will read its IP address.
• If the address is 0.0.0.0, it means that the intercom has not obtained the IP address from
the DHCP server.
Installation manual 2N® IP Verso
®
IP Verso IP address:
.
®
IP Verso product.
®
IP Verso to the power supply.
211 / 241