P7-4. Set Peel Off Sensor; P7-5. Label Peel Adjustment (Label) - Adam Equipment NETS ME Price Manual

<Picture 7-2 >
Gap
P7– 4. Set Peel off Sensor
Peel off sensor can be used to sense peel off the printed label.
can choose the way to enable the mode of peel off sensor work or
disable it.
To set Label Gap:
1. Follow steps 1 to 3 of entering Main Menu.
2.Press
7
4. Press
1
setting is 1.
4. Press PRINT
Initial State.
P7– 5. Label Feed Adjustment (Label)
The LFA (Label Feed Adjustment) adjusts the print position of a label.
It is independent of the LFS number and can range from 0 to 40; 20
being the default value. The higher the number the lower things will
print on the label; the lower the number the higher things will print.
Length
Length
.
4
for "Disable" or
SET to save the setting and return to the
ESC
for "Enable". The default
2
56
You