P8-3. Scale To Scale Data Transfer - Adam Equipment NETS ME Price Manual

out the next one; therefore, we recommend that you do not thread the
backing paper to the pick-up spool for this operation. Instead, have
the backing paper feed out with the labels as they are printed so that
they do not "peel-off." When you are ready to start printing, press
PRINT .
5. The scale will sequentially go through every PLU in the range that
you specified and print out a verification label for those PLUs that it
finds.
6.Once the scale is finished printing, press SET to exit and
ESC
return to the Initial State.
P8 - 3. Scale to Scale Data Transfer
You can transfer scale data from one scale to another; in essence, you
can clone a scale. This is NOT a network function nor can it
become one. Scale to scale data transfer uses serial (RS-232)
communication to transfer data, which can only be wired from 1
scale to another.
You need to purchase the Scale-to-Scale cable in order to connect 2
NETS scales together. There is also a PC-to-Scale cable that is
included with the NETS Software Package. You can also make either
cable yourself by using the following diagrams:
64