Adam Equipment NETS ME Price Manual page 33

13. You can press
or you can press PRINT to continue to step 14.
14. The next screen is the PLU Price. This is where you assign a
price-per-pound for a By Weight PLU or price-per-piece for a By
Count PLU. The price defaults to 0.00. Enter a price: the price
must be from 0.00 to 9999.99. If you enter 0.00, then you will be
able to change price during sales; if not, you may not be able to
change the price (see Advanced Programming, PLU Price
Change section.)
Display.
15. You can press
or you can press PRINT to continue to step 16.
16 The next screen is the PLU Shelf Life. This is where you
assign a Shelf Life in days that is used to compute the expiration
date (Sell By.) The shelf life defaults to be 0. Enter the shelf life
you want; it must be from 0 to 366. 0 will not print a Sell By
Date, 1 will print Sell By Date = Packed On Date, 2 will print Sell
By Date = Packed On Date + 1, etc. As you type, the shelf life
will appear in the Total Price Display.
17. You can press
or you can press PRINT to continue to step 18.
to store the PLU as-is and go to step 30
SAVE
The price will appear in the Total Price
–
to store the PLU as-is and go to step 30
SAVE
–
to store the PLU as-is and go to step 30
SAVE
27