P5-10. Operator Assignment; P5-11. Sales Msg Assignment (Receipt) - Adam Equipment NETS ME Price Manual

P5 – 10. Operator Assignment
You can print the operator name that typed in P3-3 Operator on label
and the operator number at bottom of each receipt in Single User
mode. You can enter the number assigned operator number in P3-3
Operator. however, not all labels or label formats have a space for the
operator name. and you set operator print [Y] in P7-9 Print Fields.
To set Operator Assignment:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
5
3. You can use
4. Enter the Operator number you wish to assign the scale to. This
number must be from 1 to 25. As you type the number, you will see it
in the Total Price Display.
5. Press PRINT
6. You are back in the Initial State.
P5 – 11. Sales MSG Assignment (Receipt)
You can print the Sales MSG that recorded in P3-4 Sale Message at
bottom of each receipt. You should enter the number assigned sale
message number in P3-4 Sale Message. 0 is default "Thank you very
much".
To set Sales MSG Assignment:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
5
3. You can use
4. Enter the Sales Massage number you wish to assign the scale to.
This number must be from 0 to 15. As you type the number, you will
see it in the Total Price Display.
5. Press PRINT
6. You are back in the Initial State.
.
to move P5-10
SET .
ESC
.
to move P5-11
SET .
ESC
44