P3-3. Operators - Adam Equipment NETS ME Price Manual

3. Enter the group number you wish to edit. This number must be
from 1 to 20. You will see the group number in the Total Price
Display.
4. Press PRINT .
5. Type a group name that you wish to use for this group. As you
type the name, you will see it displayed in the Alpha Display.
6. Press PRINT .
7. The group name was stored and the scale automatically moves
on to the next group number which is displayed in the Total Price
display.
8. If you wish to program the next group name, then you can go
back to step 5; otherwise, press
9. You can go back to step 3 to specify another group number you
may wish to edit or you can press
10. You are back in the Initial State.
P3 - 3. Operator
If multiple operators use a scale, you can assign a operator number to
each operator so that you can discern who sold the item. If you wish to
print operator name on label, you should enter the operator number P5-
10 Operator Assignment. Additionally, sales reporting can also be made
easy using operator numbers in receipt mode.
To program the operator:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
3
3. Enter the operator number you wish to edit. This number must be
from 1 to 25. You will see the operator number in the Total Price
Display.
4. Press PRINT .
2. Edit Group Name
[ BEEF
3
.
33
]
.
ESC
ESC ESC
SET to finish.