Pc-To-Scale Data Transfer - Adam Equipment NETS ME Price Manual

PC to Scale Data Transfer
You can use your PC to store data files for the NETS scale, all you
need to do is to purchase the NETS Software Package. Contact your
local Dealer for purchasing options. This is NOT a network function
nor can it become one. PC to scale data transfer uses serial (RS-
232) communication to transfer data, which can only be wired
from 1 PC to 1 scale. For Ethernet TCP/IP networking availability,
please contact dealer:
To transfer data from PC-to-Scale:
1. Place the PC and the scale together.
2. Make sure that the Power Switch is off on both the PC and the
NETS .
3. Connect the PC-to-Scale cable: the female side goes to the PC
and the male side goes to the NETS .
4. Turn the PC on, then turn the scale on, and wait for the scale to go
to the Initial State.
5. Follow the instructions that accompanied your NETS Software
Package.
1 FG Model only
Note : You can have multiple scales. The master scale
manages the slave sale. If the master scale is connected with pc,
the master scale automatically sends and saves the received data
from pc. But between The slave scale and slave scale can not
transmit.
85