Table of Contents
Advertisement
P3 – 1. Store Name & Address
You can print the store name and address or any other pertinent
information, at the bottom of each label; however, not all labels or
label formats have a space for the store name at the bottom.
Additionally, some formats may have a line or character-per-line
limitation not mentioned here.
To program the store name and address:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
3. You can now type the name, address, or any other data you
would like to appear at the bottom of your labels. You can have
up to 3 lines of data and up to 28 characters per line; however,
these can change depending on your label format. As you type,
you will see the text in the Alpha Display.
4. When you are done with line 1, press PRINT .
5. You can type the data you want for line 2 and press PRINT .
6. You can type the data you want for line 3 and press PRINT .
7. Press
ESC
8. You are back in the Initial State.
P3 – 2. Groups
In order to better sort your PLUs, you can assign each PLU to any 1 of
20 groups. Just like PLUs can be named, each of the 20 groups can
have a 20 character name. In a meat department, for example, you
can put all of your beef products under group 1 and name group 1
"Beef". You can also use the groups to separate PLUs by various
"departments" or use any hierarchical combination you desire; but, it is
up to you to maintain the hierarchy. Of course, you do not have to use
groups if you do not need them.
To program the group names:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
3
.
3
1
SET .
.
2
32
Advertisement
Table of Contents
