P5-8. Feed Length(Receipt); P5-9. Price Rounding(Receipt) - Adam Equipment NETS ME Price Manual

P5 - 8. Feed Length (Receipt)
the Feed Length is the length of the sheet that releases the receipt
without printing when pressing the
The Feed Length adjusts the print position of a receipt. It can range
from 5 to 30; 15 being the default value. The higher the number the
lower things will print on the receipt; the lower the number the higher
things will print.
To set the Feed Length assignment for the scale:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
5
3. Enter the Feed Length number you wish to assign the scale to. This
number must be from 5 to 30. As you type the number, you will see it
in the Total Price Display.
4. Press PRINT
5. You are back in the Initial State.
P5 - 9. Price Rounding (Receipt)
If you set
1
Half, total price can be rounded in receipt mode. Dime and
3
Quarter reserved for future use.
To modify Price Rounding Settings:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
5
3. Press
1
or for "Quarter". The default setting is 3.
4
4. Press PRINT
Initial State.
.
8
SET .
ESC
normal, total price can not be rounded. If you set
.
9
for "Normal" or
SET to save the setting and return to the
ESC
key once in receipt mode.
FEED
for "Dime" or
2
43
for "Half"
3