Adam Equipment NETS ME Price Manual page 31

To Create or Edit PLUs:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
1
3. Enter the PLU number you wish to create or edit. As you type
the PLU number, you will see it in the Total Price display. The
default PLU number in the Total Price Display ("0") can change
after you program several PLUs. The default value is usually
the next available (new) PLU number.
4. Press PRINT to go step 5 or press
Create & Edit and go back to the Initial State.
5. The next screen is PLU Type selection. Press
Weight or
6. The next screen is the Commodity Name Line 1. This is the first
line of your PLU name descriptor. It can be up to 56 characters
long; although, most label formats have a 28 character limit.
Type the commodity name you want for line 1. The screen
appears as follows:
7. You can press
or you can press PRINT to continue to step 8.
. The displays will show:
–
for By Count.
2
–
–
to store the PLU as-is and go to step 28
SAVE
25
to exit PLU
ESC SET
1
for By